Дебиан 8 binkd ошибка в perlhooks

Denis Mushnin написал(а) к All в Mar 16 17:45:15 по местному времени:

From: Denis Mushnin <denisvm@kuzia.metizi.net>

Доброго времени суток.
На debian 8 c perl 5.20
с вот таким простеньким perlhooks
sub on_start
{
Log(" Last modi ");
return 0;
};

sub before_recv
{
Log('НOOK before_recv start ');
return 0;
};

sub after_recv
{
Log('НOOK after_recv start ');
return 0;
};

при приеме файла происходит вот такая беда
- 16 Mar 17:34:22 [18411] incoming from 192.168.88.5 (51406)
+ 16 Mar 17:34:22 [18423] incoming session with 192.168.88.5 (51406)
- 16 Mar 17:34:22 [18423] SYS 00sudt
- 16 Mar 17:34:22 [18423] ZYZ Denis
- 16 Mar 17:34:22 [18423] LOC SPB RUSSIA
- 16 Mar 17:34:22 [18423] NDL 230K,TCP,BINKP
- 16 Mar 17:34:22 [18423] TIME Wed, 16 Mar 2016 17:34:20 +0300
- 16 Mar 17:34:22 [18423] VER binkd/1.1a-27/Win32 binkp/1.1
+ 16 Mar 17:34:22 [18423] addr: 100:0/1@metizi.net
+ 16 Mar 17:34:22 [18423] addr: 230:0/88@metizbiz (n/a or busy)
- 16 Mar 17:34:22 [18423] OPT NDA EXTCMD CRYPT
+ 16 Mar 17:34:22 [18423] Remote supports asymmetric ND mode
+ 16 Mar 17:34:22 [18423] Remote supports EXTCMD mode
+ 16 Mar 17:34:22 [18423] Remote requests CRYPT mode
- 16 Mar 17:34:22 [18423] TRF 0 4
+ 16 Mar 17:34:22 [18423] Remote has 0b of mail and 4b of files for us
- 16 Mar 17:34:22 [18423] НOOK before_recv start
+ 16 Mar 17:34:22 [18423] have 4 byte(s) of 2.2
? 16 Mar 17:34:23 [18423] Perl error: Modification of a read-only value
attempted.
16 Mar 17:34:23 [18411] rc(18423)=255

в результате файл не принимается.
причем ошибка Perl error: Modification of a read-only value
возникает при наличии любого хука.

пробовалось на разных версиях binkd.

из дебиановского репозитория, с git 1.1a-92 и 1.0-stable
Может кто сталкивался?

--- ifmail v.2.15dev5.4

Pavel Gulchouck написал(а) к Denis Mushnin в Mar 16 17:32:20 по местному времени:

Нi Denis!

16 Mar 16, Denis Mushnin ==> All:

DM> Доброго времени суток.
DM> На debian 8 c perl 5.20
[...]
DM> - 16 Mar 17:34:22 [18423] VER binkd/1.1a-27/Win32 binkp/1.1
[...]
DM> ? 16 Mar 17:34:23 [18423] Perl error: Modification of a read-only value
DM> attempted.

DM> в результате файл не принимается.
DM> причем ошибка Perl error: Modification of a read-only value
DM> возникает при наличии любого хука.

DM> пробовалось на разных версиях binkd.

DM> из дебиановского репозитория, с git 1.1a-92 и 1.0-stable
DM> Может кто сталкивался?

Покажи лог свежей версии, в какой именно момент у неё возникает эта ошибка.

У меня сейчас perl 5.20, хуки активно используются, всё работает корректно.
Вот что в history:

2015/10/09 12:12:41 1.1a-74 git
perlhooks.c,2.87,2.88
Fixed error "attempt to change r/o variable" on perl 5.20

Lucky carrier,
Паша
aka gul@gul.kiev.ua
--- GoldED+/LNX 1.1.5

Denis Mushnin написал(а) к Pavel Gulchouck в Mar 16 14:39:12 по местному времени:

From: Denis Mushnin <denisvm@kuzia.metizi.net>

Нellow Pavel
19.03.2016 17:32, Pavel Gulchouck пишет:
PG> Нi Denis!
PG> 16 Mar 16, Denis Mushnin ==> All:
DM>> Доброго времени суток.
DM>> На debian 8 c perl 5.20
PG> [...]
DM>> - 16 Mar 17:34:22 [18423] VER binkd/1.1a-27/Win32 binkp/1.1
PG> [...]
DM>> ? 16 Mar 17:34:23 [18423] Perl error: Modification of a read-only
value
DM>> attempted.
DM>> в результате файл не принимается.
DM>> причем ошибка Perl error: Modification of a read-only value
DM>> возникает при наличии любого хука.
DM>> пробовалось на разных версиях binkd.
DM>> из дебиановского репозитория, с git 1.1a-92 и 1.0-stable
DM>> Может кто сталкивался?
PG> Покажи лог свежей версии, в какой именно момент у неё возникает эта
ошибка.
PG> У меня сейчас perl 5.20, хуки активно используются, всё работает
корректно.
PG> Вот что в history:
PG> 2015/10/09 12:12:41 1.1a-74 git
PG> perlhooks.c,2.87,2.88
PG> Fixed error "attempt to change r/o variable" on perl 5.20
PG> Lucky carrier,
PG> Паша
PG> aka gul@gul.kiev.ua

Похоже я в процессе борьбы за работоспособность где-то накосячил.
На свежеустановленной Debian 8 1.1a92 нормально работает с перлом.
Перекомпилированный пакет из дистрибутива 1.0.4 ругается.
Ещебы дебианизацию на гите подправить под современность



--- ifmail v.2.15dev5.4

Pavel Gulchouck написал(а) к Denis Mushnin в Mar 16 16:19:24 по местному времени:

Нi Denis!

23 Mar 16, Denis Mushnin ==> Pavel Gulchouck:

DM>>> Доброго времени суток.
DM>>> На debian 8 c perl 5.20
PG>> [...]
DM>>> - 16 Mar 17:34:22 [18423] VER binkd/1.1a-27/Win32 binkp/1.1
PG>> [...]
DM>>> ? 16 Mar 17:34:23 [18423] Perl error: Modification of a read-only value
DM>>> attempted.
DM>>> в результате файл не принимается.
DM>>> причем ошибка Perl error: Modification of a read-only value
DM>>> возникает при наличии любого хука.
DM>>> пробовалось на разных версиях binkd.
DM>>> из дебиановского репозитория, с git 1.1a-92 и 1.0-stable
DM>>> Может кто сталкивался?
PG>> Покажи лог свежей версии, в какой именно момент у неё возникает эта ошибка.
PG>> У меня сейчас perl 5.20, хуки активно используются, всё работает корректно.
PG>> Вот что в history:
PG>> 2015/10/09 12:12:41 1.1a-74 git
PG>> perlhooks.c,2.87,2.88
PG>> Fixed error "attempt to change r/o variable" on perl 5.20

DM> Похоже я в процессе борьбы за работоспособность где-то накосячил.
DM> На свежеустановленной Debian 8 1.1a92 нормально работает с перлом.
DM> Перекомпилированный пакет из дистрибутива 1.0.4 ругается.

Да, надо перенести фикс на стабильную ветку.
Спасибо, что напомнил.

DM> Еще бы дебианизацию на гите подправить под современность

Хм, действительно. Надо будет сделать авто-апдейт для debian/changelog, как минимум.

Lucky carrier,
Паша
aka gul@gul.kiev.ua
--- GoldED+/LNX 1.1.5

Denis Mushnin написал(а) к Pavel Gulchouck в Mar 16 10:58:48 по местному времени:

From: Denis Mushnin <denisvm@kuzia.metizi.net>

Нellow Pavel
24.03.2016 16:19, Pavel Gulchouck пишет:
DM>> Еще бы дебианизацию на гите подправить под современность
PG> Хм, действительно. Надо будет сделать авто-апдейт для
debian/changelog, как
PG> минимум.
Ещеб debian/init debian/rules debian/systemd перелопатить с гитовским
еще на debian 6 не собирался и не стартовал.


--- ifmail v.2.15dev5.4

Denis Mushnin написал(а) к Denis Mushnin в Mar 16 14:08:23 по местному времени:

From: Denis Mushnin <denisvm@kuzia.metizi.net>

DM> Похоже я в процессе борьбы за работоспособность где-то накосячил.
DM> На свежеустановленной Debian 8 1.1a92 нормально работает с перлом.
DM> Перекомпилированный пакет из дистрибутива 1.0.4 ругается.
DM> Ещебы дебианизацию на гите подправить под современность

Debian 8.3 свежеустановленный
cat /etc/binkd/binkd.cfg

log /var/log/binkd/binkd
loglevel 9

domain metiznet /var/spool/ftn/outb/metiznet 100
domain metizi.net alias-for metiznet
address 100:0/200.0@metiznet
sysname "Ivan's BBS"
location "SPB, Russia"
sysop "Ivan Ivanov"
nodeinfo 115200,TCP,BINKP
conlog 4
timeout 10
connect-timeout 30
call-delay 10
rescan-delay 30

try 10
hold 30m
percents
printq
pid-file /run/ftn/binkd.pid
inbound /var/spool/ftn/inb
inbound-nonsecure /var/spool/ftn/inb
temp-inbound /var/spool/ftn/inco
minfree 2048
minfree-nonsecure 2048
kill-dup-partial-files
kill-old-partial-files 1d
kill-old-bsy 12h
root-domain metizi.net
prescan
perl-hooks /etc/binkd/test.pl

cat /etc/binkd/test.pl

sub on_start
{
Log('Perl started');
return 0;
};


sub before_recv
{
Log('before recv');
return 0;
};

sub after_recv
{
Log('after recv');
return 0;
};


cat /var/log/binkd/binkd

25 Mar 13:52:28 [18088] BEGIN, binkd/1.1a-92/Linux
/etc/binkd/binkd.cfg -q -C
25 Mar 13:52:28 [18088] perl_init(): /etc/binkd/test.pl
25 Mar 13:52:28 [18088] perl_init(): parse rc=0
25 Mar 13:52:28 [18088] perl_setup(): perl context 0xb924da98
25 Mar 13:52:28 [18088] perl_setup(): %config done
25 Mar 13:52:28 [18088] perl_setup(): %domain done
25 Mar 13:52:28 [18088] perl_setup(): @addr done
25 Mar 13:52:28 [18088] perl_setup(): @listen done
25 Mar 13:52:28 [18088] perl_setup(): @ftrans done
25 Mar 13:52:28 [18088] perl_setup(): @overwrite done
25 Mar 13:52:28 [18088] perl_setup(): @skip done
25 Mar 13:52:28 [18088] perl_setup(): %share done
25 Mar 13:52:28 [18088] perl_setup(): %node done
25 Mar 13:52:28 [18088] perl_init(): running body
25 Mar 13:52:28 [18088] perl_init(): end
25 Mar 13:52:28 [18088] perlonstart()
- 25 Mar 13:52:28 [18088] Perl started
25 Mar 13:52:28 [18088] perlonstart() end
25 Mar 13:52:28 [18088] unlinkpidfile: /run/ftn/binkd.pid: Нет
такого файла или каталога
25 Mar 13:52:28 [18088] created /run/ftn/binkd.pid
25 Mar 13:52:28 [18088] servmgr started
- 25 Mar 13:52:28 [18088] servmgr listen on *:binkp
25 Mar 13:52:28 [18089] clientmgr started
- 25 Mar 13:54:01 [18088] incoming from 192.168.88.5 (60231)
25 Mar 13:54:01 [18088] started server #1, id=18114
25 Mar 13:54:01 [18114] binkp init done, socket # is 5
+ 25 Mar 13:54:01 [18114] incoming session with 192.168.88.5
25 Mar 13:54:01 [18114] send message NUL OPT
CRAM-MD5-6b45d9bbfaaf0b4ed08086d97e8954ee
25 Mar 13:54:01 [18114] send message NUL SYS Ivan's BBS
25 Mar 13:54:01 [18114] send message NUL ZYZ Ivan Ivanov
25 Mar 13:54:01 [18114] send message NUL LOC SPB, Russia
25 Mar 13:54:01 [18114] send message NUL NDL 115200,TCP,BINKP
25 Mar 13:54:01 [18114] send message NUL TIME Fri, 25 Mar 2016
13:54:01 +0300
25 Mar 13:54:01 [18114] send message NUL VER binkd/1.1a-92/Linux binkp/1.1
25 Mar 13:54:01 [18114] send_ADR(): got 0 remote addresses
25 Mar 13:54:01 [18114] send message ADR 100:0/200@metiznet
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 2 (r=1, w=1)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 11 (msg)
25 Mar 13:54:01 [18114] put next msg to obuf, 48
25 Mar 13:54:01 [18114] put next msg to obuf, 17
25 Mar 13:54:01 [18114] put next msg to obuf, 18
25 Mar 13:54:01 [18114] put next msg to obuf, 18
25 Mar 13:54:01 [18114] put next msg to obuf, 23
25 Mar 13:54:01 [18114] put next msg to obuf, 39
25 Mar 13:54:01 [18114] put next msg to obuf, 36
25 Mar 13:54:01 [18114] put next msg to obuf, 22
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 2 (r=1, w=1)
25 Mar 13:54:01 [18114] Read 11 bytes
25 Mar 13:54:01 [18114] got block: 11 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL SYS 00sudt
- 25 Mar 13:54:01 [18114] SYS 00sudt
25 Mar 13:54:01 [18114] sending 221 byte(s)
25 Mar 13:54:01 [18114] send() done, rc=221
25 Mar 13:54:01 [18114] data sent
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 10 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 10 bytes
25 Mar 13:54:01 [18114] got block: 10 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL ZYZ Denis
- 25 Mar 13:54:01 [18114] ZYZ Denis
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 15 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 15 bytes
25 Mar 13:54:01 [18114] got block: 15 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL LOC SPB RUSSIA
- 25 Mar 13:54:01 [18114] LOC SPB RUSSIA
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 19 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 19 bytes
25 Mar 13:54:01 [18114] got block: 19 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL NDL 230K,TCP,BINKP
- 25 Mar 13:54:01 [18114] NDL 230K,TCP,BINKP
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 37 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 37 bytes
25 Mar 13:54:01 [18114] got block: 37 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL TIME Fri, 25 Mar 2016 13:53:57 +0300
- 25 Mar 13:54:01 [18114] TIME Fri, 25 Mar 2016 13:53:57 +0300
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 34 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 34 bytes
25 Mar 13:54:01 [18114] got block: 34 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL VER binkd/1.1a-27/Win32 binkp/1.1
- 25 Mar 13:54:01 [18114] VER binkd/1.1a-27/Win32 binkp/1.1
25 Mar 13:54:01 [18114] remote uses binkp v.1.1
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 18 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 18 bytes
25 Mar 13:54:01 [18114] got block: 18 (msg)
25 Mar 13:54:01 [18114] rcvd msg ADR 100:0/1@metiznet
25 Mar 13:54:01 [18114] created /var/spool/ftn/outb/metiznet/00000001.bsy
+ 25 Mar 13:54:01 [18114] addr: 100:0/1@metiznet
25 Mar 13:54:01 [18114] Remote IP not checked
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 21 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 21 bytes
25 Mar 13:54:01 [18114] got block: 21 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL OPT NDA EXTCMD CRYPT
- 25 Mar 13:54:01 [18114] OPT NDA EXTCMD CRYPT
+ 25 Mar 13:54:01 [18114] Remote supports asymmetric ND mode
+ 25 Mar 13:54:01 [18114] Remote supports EXTCMD mode
+ 25 Mar 13:54:01 [18114] Remote requests CRYPT mode
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 8 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 8 bytes
25 Mar 13:54:01 [18114] got block: 8 (msg)
25 Mar 13:54:01 [18114] rcvd msg NUL TRF 0 2
- 25 Mar 13:54:01 [18114] TRF 0 2
+ 25 Mar 13:54:01 [18114] Remote has 0b of mail and 2b of files for us
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 42 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 42 bytes
25 Mar 13:54:01 [18114] got block: 42 (msg)
25 Mar 13:54:01 [18114] rcvd msg PWD
CRAM-MD5-a3c8a34ff60a982557ee4c713aec7ce5
25 Mar 13:54:01 [18114] send message NUL TRF 0 0
25 Mar 13:54:01 [18114] send message NUL OPT EXTCMD
25 Mar 13:54:01 [18114] send message OK non-secure
25 Mar 13:54:01 [18114] send message EOB
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=0, w=1)
25 Mar 13:54:01 [18114] put next msg to obuf, 10
25 Mar 13:54:01 [18114] put next msg to obuf, 13
25 Mar 13:54:01 [18114] put next msg to obuf, 13
25 Mar 13:54:01 [18114] put next msg to obuf, 3
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=0, w=1)
25 Mar 13:54:01 [18114] sending 39 byte(s)
25 Mar 13:54:01 [18114] send() done, rc=39
25 Mar 13:54:01 [18114] data sent
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 19 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 19 bytes
25 Mar 13:54:01 [18114] got block: 19 (msg)
25 Mar 13:54:01 [18114] rcvd msg FILE 2.2 2 1458894003 0
25 Mar 13:54:01 [18114] perlbeforerecv(), perl=0xb924da98
25 Mar 13:54:01 [18114] perlsetupsession(), perl context 0xb924da98
25 Mar 13:54:01 [18114] perlsetupsession() end
25 Mar 13:54:01 [18114] perlsetupqueue()
25 Mar 13:54:01 [18114] perlsetupqueue() end
- 25 Mar 13:54:01 [18114] before recv
25 Mar 13:54:01 [18114] perlbeforerecv() end
+ 25 Mar 13:54:01 [18114] have 2 byte(s) of 2.2
25 Mar 13:54:01 [18114] send message GET 2.2 2 1458894003 2
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=0, w=1)
25 Mar 13:54:01 [18114] put next msg to obuf, 21
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=0, w=1)
25 Mar 13:54:01 [18114] sending 21 byte(s)
25 Mar 13:54:01 [18114] send() done, rc=21
25 Mar 13:54:01 [18114] data sent
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 2 (data)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] got block: 2 (data)
25 Mar 13:54:01 [18114] ignoring data block (2 byte(s))
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 2 bytes
25 Mar 13:54:01 [18114] recvd hdr: 19 (msg)
25 Mar 13:54:01 [18114] tv.tvsec=10, tv.tvusec=0
25 Mar 13:54:01 [18114] selected 1 (r=1, w=0)
25 Mar 13:54:01 [18114] Read 19 bytes
25 Mar 13:54:01 [18114] got block: 19 (msg)
25 Mar 13:54:01 [18114] rcvd msg FILE 2.2 2 1458894003 2
25 Mar 13:54:01 [18114] perlbeforerecv(), perl=0xb924da98
25 Mar 13:54:01 [18114] perlsetupqueue()
25 Mar 13:54:01 [18114] perlsetupqueue() end
? 25 Mar 13:54:01 [18114] Perl error: Modification of a read-only value
attempted.
25 Mar 13:54:01 [18114] exitfunc()
25 Mar 13:54:01 [18114] Closing server socket # 3
25 Mar 13:54:01 [18114] Closing server socket # 4
25 Mar 13:54:01 [18114] unlinked
`/var/spool/ftn/outb/metiznet/00000001.bsy'
25 Mar 13:54:01 [18114] bsyremoveall: done
25 Mar 13:54:01 [18088] rc(18114)=255

--- ifmail v.2.15dev5.4

Pavel Gulchouck написал(а) к Denis Mushnin в Mar 16 17:52:32 по местному времени:

Нi Denis!

25 Mar 16, Denis Mushnin ==> Denis Mushnin:

DM> Debian 8.3 свежеустановленный
DM> cat /etc/binkd/binkd.cfg

[...]
DM> ? 25 Mar 13:54:01 [18114] Perl error: Modification of a read-only value
DM> attempted.

Воспроизвёл, спасибо.
Буду фиксить.

Lucky carrier,
Паша
aka gul@gul.kiev.ua
--- GoldED+/LNX 1.1.5

Pavel Gulchouck написал(а) к Denis Mushnin в Mar 16 18:31:06 по местному времени:

Нi Denis!

28 Mar 16, Pavel Gulchouck ==> Denis Mushnin:

DM>> ? 25 Mar 13:54:01 [18114] Perl error: Modification of a read-only value attempted.

PG> Воспроизвёл, спасибо.
PG> Буду фиксить.

Думаю, что пофиксил и в девелоперской, и в стабильной ветке.
В 1.0.5 будет исправлено, а пока можно использовать версию из git-репозитория (стабильная ветка binkd-1_0-stable).

Lucky carrier,
Паша
aka gul@gul.kiev.ua
--- GoldED+/LNX 1.1.5

Alexandr Kruglikov написал(а) к Pavel Gulchouck в Mar 16 20:50:08 по местному времени:

Привет, Pavel!

28 мар 16 18:31, Pavel Gulchouck писал(а) к Denis Mushnin:

PG>> Воспроизвёл, спасибо.
PG>> Буду фиксить.
PG> Думаю, что пофиксил и в девелоперской, и в стабильной ветке.
PG> В 1.0.5 будет исправлено, а пока можно использовать версию из
PG> git-репозитория (стабильная ветка binkd-1_0-stable).

Что-то перестал собираться под OS X.

./configure --prefix=/Users/around/fido_make/binkd --with-proxy --with-ntlm --with-aso --with-bwlim --with-perl

around-mac:binkd around$ make all
Making depends...
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
clang: error: cannot use 'dependencies' output with multiple -arch options
Compiling perlhooks.c...
Linking binkd...
ld: warning: ignoring file md5b.o, file was built for x86_64 which is not the architecture being linked (i386): md5b.o
ld: warning: ignoring file binkd.o, file was built for x86_64 which is not the architecture being linked (i386): binkd.o
ld: warning: ignoring file readcfg.o, file was built for x86_64 which is not the architecture being linked (i386): readcfg.o
ld: warning: ignoring file tools.o, file was built for x86_64 which is not the architecture being linked (i386): tools.o
ld: warning: ignoring file ftnaddr.o, file was built for x86_64 which is not the architecture being linked (i386): ftnaddr.o
ld: warning: ignoring file ftnq.o, file was built for x86_64 which is not the architecture being linked (i386): ftnq.o
ld: warning: ignoring file client.o, file was built for x86_64 which is not the architecture being linked (i386): client.o
ld: warning: ignoring file server.o, file was built for x86_64 which is not the architecture being linked (i386): server.o
ld: warning: ignoring file protocol.o, file was built for x86_64 which is not the architecture being linked (i386): protocol.o
ld: warning: ignoring file bsy.o, file was built for x86_64 which is not the architecture being linked (i386): bsy.o
ld: warning: ignoring file inbound.o, file was built for x86_64 which is not the architecture being linked (i386): inbound.o
ld: warning: ignoring file branch.o, file was built for x86_64 which is not the architecture being linked (i386): branch.o
ld: warning: ignoring file breaksig.o, file was built for x86_64 which is not the architecture being linked (i386): breaksig.o
ld: warning: ignoring file unix/getfree.o, file was built for x86_64 which is not the architecture being linked (i386): unix/getfree.o
ld: warning: ignoring file unix/rename.o, file was built for x86_64 which is not the architecture being linked (i386): unix/rename.o
ld: warning: ignoring file ftndom.o, file was built for x86_64 which is not the architecture being linked (i386): ftndom.o
ld: warning: ignoring file ftnnode.o, file was built for x86_64 which is not the architecture being linked (i386): ftnnode.o
ld: warning: ignoring file srif.o, file was built for x86_64 which is not the architecture being linked (i386): srif.o
ld: warning: ignoring file pmatch.o, file was built for x86_64 which is not the architecture being linked (i386): pmatch.o
ld: warning: ignoring file readflo.o, file was built for x86_64 which is not the architecture being linked (i386): readflo.o
ld: warning: ignoring file iptools.o, file was built for x86_64 which is not the architecture being linked (i386): iptools.o
ld: warning: ignoring file prothlp.o, file was built for x86_64 which is not the architecture being linked (i386): prothlp.o
ld: warning: ignoring file run.o, file was built for x86_64 which is not the architecture being linked (i386): run.o
ld: warning: ignoring file rfc2553.o, file was built for x86_64 which is not the architecture being linked (i386): rfc2553.o
ld: warning: ignoring file exitproc.o, file was built for x86_64 which is not the architecture being linked (i386): exitproc.o
ld: warning: ignoring file binlog.o, file was built for x86_64 which is not the architecture being linked (i386): binlog.o
ld: warning: ignoring file getw.o, file was built for x86_64 which is not the architecture being linked (i386): getw.o
ld: warning: ignoring file xalloc.o, file was built for x86_64 which is not the architecture being linked (i386): xalloc.o
ld: warning: ignoring file crypt.o, file was built for x86_64 which is not the architecture being linked (i386): crypt.o
ld: warning: ignoring file unix/daemonize.o, file was built for x86_64 which is not the architecture being linked (i386): unix/daemonize.o
ld: warning: ignoring file unix/setpttl.o, file was built for x86_64 which is not the architecture being linked (i386): unix/setpttl.o
ld: warning: ignoring file https.o, file was built for x86_64 which is not the architecture being linked (i386): https.o
ld: warning: ignoring file ntlm/helpers.o, file was built for x86_64 which is not the architecture being linked (i386): ntlm/helpers.o
ld: warning: ignoring file ntlm/desenc.o, file was built for x86_64 which is not the architecture being linked (i386): ntlm/desenc.o
ld: warning: ignoring file ntlm/ecbenc.o, file was built for x86_64 which is not the architecture being linked (i386): ntlm/ecbenc.o
ld: warning: ignoring file ntlm/md4dgst.o, file was built for x86_64 which is not the architecture being linked (i386): ntlm/md4dgst.o
ld: warning: ignoring file ntlm/setkey.o, file was built for x86_64 which is not the architecture being linked (i386): ntlm/setkey.o
ld: warning: ignoring file compress.o, file was built for x86_64 which is not the architecture being linked (i386): compress.o
ld: warning: ignoring file srvgai.o, file was built for x86_64 which is not the architecture being linked (i386): srvgai.o
Undefined symbols for architecture i386:
"_Log", referenced from:
perlinit in perlhooks.o
perlsetup in perlhooks.o
perl_warnsv in perlhooks.o
perldone in perlhooks.o
perl_onstart in perlhooks.o
suberr in perlhooks.o
perl_oncall in perlhooks.o
...
"currentconfig", referenced from:
perldone in perlhooks.o
perlaeq in perlhooks.o
perlarm in perlhooks.o
"expftnaddress", referenced from:
perl_onhandshake in perlhooks.o
refreshqueue in perlhooks.o
perlaeq in perlhooks.o
perlarm in perlhooks.o
"foreachnode", referenced from:
perlsetup in perlhooks.o
"ftnaddresscmp", referenced from:
perlaeq in perlhooks.o
perlarm in perlhooks.o
"lock_currentconfig", referenced from:
perl_onlog in perlhooks.o
"_main", referenced from:
implicit entry/start for main executable
"msgsend2", referenced from:
perl_msgsend in perlhooks.o
"_mypid", referenced from:
perl_onhandshake in perlhooks.o
perl_aftersession in perlhooks.o
perl_onlog in perlhooks.o
perlaeq in perlhooks.o
perlarm in perlhooks.o
perl_msgsend in perlhooks.o
"parseftnaddress", referenced from:
perl_onhandshake in perlhooks.o
refreshqueue in perlhooks.o
perlaeq in perlhooks.o
perlarm in perlhooks.o
"qfree", referenced from:
refreshqueue in perlhooks.o
"q_getsizes", referenced from:
perl_oncall in perlhooks.o
perl_onhandshake in perlhooks.o
setupsession in perlhooks.o
"q_scanaddrs", referenced from:
perl_oncall in perlhooks.o
perl_onhandshake in perlhooks.o
"savedenvp", referenced from:
perlinit in perlhooks.o
"_strnzcpy", referenced from:
suberr in perlhooks.o
refreshqueue in perlhooks.o
perl_afterrecv in perlhooks.o
perl_beforesend in perlhooks.o
perl_onlog in perlhooks.o
"unlock_configstructure", referenced from:
perl_onlog in perlhooks.o
"_xalloc", referenced from:
suberr in perlhooks.o
perl_onhandshake in perlhooks.o
refreshqueue in perlhooks.o
perlarm in perlhooks.o
"_xfree", referenced from:
perlinit in perlhooks.o
suberr in perlhooks.o
perl_oncall in perlhooks.o
"xftnaddress_tostr", referenced from:
perlsetup in perlhooks.o
perl_oncall in perlhooks.o
perl_onerror in perlhooks.o
perl_onhandshake in perlhooks.o
setupqueue in perlhooks.o
perlaeq in perlhooks.o
perlarm in perlhooks.o
...
"_xpmatch", referenced from:
perlaeq in perlhooks.o
perlarm in perlhooks.o
"_xstrcat", referenced from:
perlinit in perlhooks.o
"_xstrdup", referenced from:
perlinit in perlhooks.o
suberr in perlhooks.o
perl_oncall in perlhooks.o
perl_onhandshake in perlhooks.o
perl_afterhandshake in perlhooks.o
ld: symbol(s) not found for architecture i386
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: * [binkd] Error 1

С наилучшими пожеланиями, Alexandr.

--- "OS X/binkd/hpt-1.9-cur/GoldEd+-1.1.5-b20160201" ---

Alexandr Kruglikov написал(а) к Alexandr Kruglikov в Mar 16 20:54:52 по местному времени:

Привет, Alexandr!

30 мар 16 20:50, Alexandr Kruglikov писал(а) к Pavel Gulchouck:

AK> Что-то перестал собираться под OS X.

Прошу прощения, после предыдущей сборки не сделал make clean.
Всё отлично собирается...

С наилучшими пожеланиями, Alexandr.

--- "OS X/binkd/hpt-1.9-cur/GoldEd+-1.1.5-b20160201" ---